Terminal Crimping Presses for
Wire Harness and Cable Assembly Production
6-Ton and 22-Ton Presses Backed by 70 Years of Terminal Crimping Experience
Every press is built for long-term production use, backed by a one-year parts and labor warranty, and supported by direct access to our engineering team in Clinton Township, Michigan.
Four Press Models to Match Your Production
Diamond Die & Mold offers four terminal crimping press models across two force capacities and two generations. All models are semi-automatic and support 0.001″ shut height adjustment for precision crimp control.
6-Ton Presses Available
22-Ton Presses Available
X6 (Gen I) – 6-Ton Terminal Crimping Press
The X6 (Gen I) is the legacy 6-ton press platform, available while supplies last for customers who prefer continuity with installed base equipment. Ideal for signal-level and control wiring, small to mid-size terminals, and bench-top production environments.
Ratings and Capacities
- Crimp Force: 6 tons (53.38 kN)
- Max Wire Diameter: 4/0 (300 mm²)
Power System
- Drive System: Motor/Gearbox Combination
- Input Power: 220V/440V 3-phase
- Max Load Amperage: 20 Amps
- Motor Speed: 1740 RPM
- Press Speed: 189 RPM
- Motor Power: 2 hp (1.49 kW)
- Control Type: Manual
Dimensions
- Assembly Height: 39.0″ (991 mm)
- Assembly Width: 17.0″ (432 mm)
- Assembly Depth: 13.5″ (343 mm)
- Frame Width: 11.0″ (280 mm)
- Frame Depth: 11.0″ (280 mm)
- Ram Stroke: 0.787″ (40 mm)
- Ram Open Height: 10.125″ (258 mm)
- Ram Shut Height: 8.625″ (219 mm)
- Throat Depth: 4.75″ (121 mm)
- Distance Between Pillars: 8.125″ (207 mm)
- Unit Base Weight: 250 lb (114 kg)
Applicator Compatibility
- Hi-Speed Applicators
- Hydrofeed Applicators
- Applicator Quick Disconnect: Available
- Feed Direction: We have Left to Right, Right to Left, End to End and Loose piece for all three types of applicators (Hi-Speed, Hydrofeed and Heavy Duty)
Warranty:
1 year, parts and labor
X6 (Gen II) – 6-Ton Terminal Crimping Press (Current Model)
The X6 (Gen II) is the current-generation 6-ton press with expanded safety options including compatibility with our programmable light curtain. Same performance profile as Gen I with an updated footprint, electronics, controls and safety features.
Ratings and Capacities
- Crimp Force: 6 tons (53.38 kN)
- Max Wire Diameter: 4/0 (300 mm²)
Power System
- Drive System: Motor/Gearbox Combination
- Input Power: 220V/440V 3-phase
- Max Load Amperage: 20 Amps
- Motor Speed: 1740 RPM
- Press Speed: 189 RPM
- Motor Power: 2 hp (1.49 kW)
- Control Type: Manual
Dimensions
- Assembly Height: 39.0″ (991 mm)
- Assembly Width: 19.0″ (483 mm)
- Assembly Depth: 19.5″ (496 mm)
- Frame Width: 11.0″ (280 mm)
- Frame Depth: 11.0″ (280 mm)
- Ram Stroke: 0.787″ (40 mm)
- Ram Open Height: 10.125″ (258 mm)
- Ram Shut Height: 8.625″ (219 mm)
- Throat Depth: 4.75″ (121 mm)
- Distance Between Pillars: 8.125″ (207 mm)
- Unit Base Weight: 250 lb (114 kg)
Applicator Compatibility
- Hi-Speed Applicators
- Hydrofeed Applicators
- Applicator Quick Disconnect: Available
- Feed Direction: We have Left to Right, Right to Left, End to End and Loose piece for all three types of applicators (Hi-Speed, Hydrofeed and Heavy Duty)
Warranty:
1 year, parts and labor
X22 (Gen I) – 22-Ton Terminal Crimping Press
The X22 (Gen I) is the legacy 22-ton platform for high-force applications including large terminals, heavy-gauge cable, high-voltage and EV power systems. Available while supplies last for customers who prefer continuity with installed base equipment.
Ratings and Capacities
- Crimp Force: 22 tons (195.72 kN)
- Max Wire Diameter: 1000 kcmil (600 mm²)
Power System
- Drive System: Motor/Gearbox Combination
- Input Power: 220V/440V 3-phase
- Max Load Amperage: 35 Amps
- Motor Speed: 1758 RPM
- Press Speed: 104 RPM
- Motor Power: 5 hp (3.73 kW)
- Control Type: Manual
Dimensions
- Assembly Height: 46.0″ (1169 mm)
- Assembly Width: 18.5″ (470 mm)
- Assembly Depth: 19.0″ (483 mm)
- Frame Width: 12.5″ (318 mm)
- Frame Depth: 15.25″ (388 mm)
- Ram Stroke: 2.0″ (50.8 mm)
- Ram Open Height: 9.75″ (247.6 mm)
- Ram Shut Height: 7.75″ (196.8 mm)
- Throat Depth: 5.25″ (133.3 mm)
- Distance Between Pillars: 9.625″ (244 mm)
- Unit Base Weight: 600 lb (273 kg)
Applicator Compatibility
- Heavy Duty Applicators
- Hydrofeed Applicators
- Applicator Quick Disconnect: Not available
- Feed Direction: We have Left to Right, Right to Left, End to End and Loose piece for all three types of applicators (Hi-Speed, Hydrofeed and Heavy Duty)
Warranty:
1 year, parts and labor
X22 (Gen II) – 22-Ton Terminal Crimping Press (Current Model)
The X22 (Gen II) is the current-generation 22-ton press with expanded safety options and a slightly updated footprint, electronics, controls and safety features. Same high-force performance as Gen I with support for the programmable light curtain option.
Ratings and Capacities
- Crimp Force: 22 tons (195.72 kN)
- Max Wire Diameter: 1000 kcmil (600 mm²)
Power System
- Drive System: Motor/Gearbox Combination
- Input Power: 220V/440V 3-phase
- Max Load Amperage: 35 Amps
- Motor Speed: 1758 RPM
- Press Speed: 104 RPM
- Motor Power: 5 hp (3.73 kW)
- Control Type: Manual
Dimensions
- Assembly Height: 46.0″ (1169 mm)
- Assembly Width: 20.5″ (521 mm) — 22.25″ (566 mm) with light curtain option
- Assembly Depth: 21.5″ (546 mm)
- Frame Width: 12.5″ (318 mm)
- Frame Depth: 15.25″ (388 mm)
- Ram Stroke: 2.0″ (50.8 mm)
- Ram Open Height: 9.75″ (247.6 mm)
- Ram Shut Height: 7.75″ (196.8 mm)
- Throat Depth: 5.25″ (133.3 mm)
- Distance Between Pillars: 9.625″ (244 mm)
- Unit Base Weight: 600 lb (273 kg)
Applicator Compatibility
- Heavy Duty Applicators
- Hydrofeed Applicators
- Applicator Quick Disconnect: Not available
- Feed Direction: We have Left to Right, Right to Left, End to End and Loose piece for all three types of applicators (Hi-Speed, Hydrofeed and Heavy Duty)
Warranty:
1 year, parts and labor
Standard Features on Every Press
Every Diamond Die & Mold terminal crimping press ships with:
- Plexiglass back cover for operator safety and visibility
- Plexiglass front cover with customizable openings, carrier strip entry and exit, and wire entry when purchased with an applicator
- Emergency stop (E-Stop)
- Single-switch foot pedal
Available Options and Upgrades
Configure your press with additional safety, control, and monitoring features:
- Safety foot pedal switch (double-switch configuration for two-hand operation)
- Palm button switches
- Crimp force monitoring for quality validation and process control
- Programmable light curtain (X6 Gen II and X22 Gen II only)
Contact our team to discuss which options fit your production and safety requirements.
Engineered to Work with Diamond Die & Mold and Competitor Applicators
Diamond Die & Mold presses are designed to integrate with our own applicators (Hi-Speed, Hydrofeed, Heavy Duty) as well as industry-standard competitor applicators. This cross-brand compatibility means you can standardize on Diamond Die & Mold presses across production lines without replacing your existing applicator inventory.
Our engineering team can help you validate compatibility with your current applicator setup before you commit.
Legacy Press Support and Applicator Continuity
Not every operation needs a full equipment replacement. Diamond Die & Mold supports customers who prefer to maintain their installed base of X6 (Gen I) and X22 (Gen I) presses. Legacy models remain available while supplies last, and our team can help you decide whether Gen I continuity or Gen II upgrades better fit your production plan.
For older or discontinued presses from any manufacturer where prints no longer exist, our reverse engineering service can replicate or repair worn press components to keep your production running.
Backed by Woman-Owned Small Business and ISO 9001 Certification
Diamond Die & Mold is a Woman-Owned Small Business (WOSB) certified by the SBA and holds ISO 9001 quality management certification. Our presses support:
- Federal contract requirements for supplier diversity
- Fortune 500 supplier diversity programs
- Automotive, Aerospace and medical device buyers requiring ISO 9001 compliance
- Domestic supply chain security for defense and reshoring initiatives
Every press is designed, assembled, and supported from our facility in Clinton Township, Michigan.
What to Know About Diamond Die & Mold Terminal Crimping Presses
What's the difference between the 6-ton and 22-ton presses?
The 6-ton X6 is built for signal-level and mid-size terminals in bench-top production environments and pairs with Hi-Speed and Hydrofeed applicators. The 22-ton X22 handles large terminals and heavy-gauge cable up to 1000 kcmil (600 mm²) for high-voltage, EV, and industrial power applications and pairs with Heavy Duty and Hydrofeed applicators.
What's the difference between Gen I and Gen II?
Gen I represents our legacy platform, still available while supplies last for customers who prefer continuity with their installed base equipment. Gen II is the current-generation press with an updated footprint and support for expanded safety options including the programmable light curtain. Crimp force, motor power, and press speed are identical between generations.
Can I use Diamond Die & Mold presses with applicators from other brands?
Yes. Our presses are engineered to integrate with our own applicators as well as industry-standard competitor applicators. Contact our engineering team to validate compatibility with your current applicator setup.
Does the press include crimp force monitoring?
Crimp force monitoring is available as an option on all press models. It’s not standard equipment but can be added to help validate crimp quality during production.
What safety features are standard versus optional?
Standard safety features include the E-Stop, single-switch foot pedal, and Plexiglass covers. Optional safety upgrades include a two-switch safety foot pedal or palm button switches, and a programmable light curtain (Gen II models only).
What is the warranty on Diamond Die & Mold presses?
Every press comes with a one-year parts and labor warranty. Our engineering team also provides direct support for the life of the press, including service on legacy Gen I models.
Can you support or replace parts for older, discontinued presses?
Yes. Through our reverse engineering service, we can replicate or rebuild worn press components even for older presses without original drawings. Send us the part or reference model and we’ll measure, model, and reproduce what you need.
Explore Additional
Diamond Die Services
Hi-Speed Applicators
Built for signal-level terminals where precision and speed matter most.
Hydrofeed Applicators
Mid-range applicators built for controlled feed and consistent performance.
Heavy Duty Applicators
Engineered for large-format power and EV cable terminations.
Perishable Tooling
High-precision replacement tooling built for repeat use in high-volume production.